Specialized Rigging Equipment Rentals

Specialized rigging equipment is an assembly of metal parts that are used to lift and move heavy objects by suspending them from a beam or girder. The most common type of rigging equipment is the crane, which is used to lift and move heavy loads in a variety of industries.

Rigging equipment is necessary to safely and efficiently move heavy objects. Without rigging equipment, you would be forced to rely on manpower alone to move these objects, which can be dangerous and time-consuming. With rigging equipment, you can quickly and easily move heavy objects with minimal effort.

There are a few reasons why someone might rent specialized rigging equipment. Perhaps they need to move a very large object and don’t have the proper equipment to do so. Maybe they are working on a project that requires rigging and don’t have the time or resources to purchase the necessary equipment.

Whatever the reason, renting rigging equipment can be a great solution.

Rigging equipment should be inspected on a regular basis to ensure that it is in good working condition. Depending on the type of rigging equipment, the frequency of inspection will vary. For example, wire rope should be inspected more frequently than steel cables.

Below is a guide to help you determine how often your rigging equipment should be inspected:

• Wire rope should be inspected before each use. If it shows signs of wear or damage, it should be removed from service and replaced.
• Steel cables should be inspected at least once a week. If they show signs of wear or damage, they should be removed from service and replaced.
• Polyester webbing should be inspected at least once a month. If it shows signs of wear or damage, it should be removed from service and replaced.
• Nylon webbing should be inspected at least every six months. If it shows signs of wear or damage, it should be removed from service and replaced.
• Chain should be inspected at least every six months. If it shows signs of wear or damage, it should be removed from service and replaced.

In general, it is always better to err on the side of caution when it comes to inspecting rigging equipment. If there is any doubt about the condition of the equipment, it should be taken out of service and replaced.

Rigging in construction is the process of setting up and assembling the various materials and equipment needed for a construction project. This includes everything from the initial planning and layout of the construction site to the actual erection of the structures and buildings.

The duties of a rigger can vary depending on the specific job at hand, but there are some common duties that riggers typically perform.

Perhaps the most important duty of a rigger is to ensure the safety of both the workers and the equipment being used. This means inspecting both the equipment and the work site before any rigging takes place to identify any potential hazards.